- Supports AI, DXF, PLT, Gerber and other graphic data formats, and accept the international standard G code generated by Mater Cam, Type3, Wentai and other software.
- To conduct automatic optimization when opening / importing DXF and other external files, including: to remove repetitive lines, merger connected lines, remove tiny graphics as well as automatically distinguish inside and outside dies and conduct sorting. Automatic optimization process can be defined, and the above each function can also be carried out manually.
- To support common editing and typesetting functions, including: zooming in and zooming out, rotation, alignment, copying, combination, smoothness and connection and so on.
- To use the easiest way to set the lead, slotted compensation, micro connection, bridge connection, over cut, lead seal gap and so on.
- To distinguish the overcast cut and yang cut, determine the direction of slotted compensation in accordance with the overcast cut and yang cut, and check the led.
- To support curve splitting and connection, curve smoothness, text-to-curve, component integration and exploding.
- With Flexible automatic sorting and manual sorting functions, to support the function to fix the processing order through group.
- With particular browsing capabilities of processing order, to check the processing order in a more interactive way than that of imitation.
- To support poly punching and incremental punching, pre-punching. To support the settings of separate laser power, frequency, laser form, type of gas, air pressure and following height for punching process and cutting process.
- To support the speed capacity controland set separate lead velocity.
- With Powerful material library functions, to keep all processing parameters so that it can be provided again for the same material.
- With processing breakpoint memory, to trace the breakpoint forwards and backwards; to process some graphics.
- To be able to be positioned to any point in the process of stop or temporary stop; to start processing from any position.
- The same set of software supports round pipe cutting and plane cutting, and the way of programming is exactly the same; to support intersecting line cutting.
- With powerful expansion capacity, as much as 15 PLC process edit and more than 30 programmable process.
- Programmable input and output outlet, programmable alarm input.
- To support the remote control of the system through wireless teachbox and Ethernet.
- Sorry, this product cannot be purchased.
CYPCUT LASER CUTTING CONTROL SYSTEM
CYPCUT
CYPCUT LASER CUTTING CONTROL SYSTEM (CypCut for short) is a set of system software designed for plane laser cutting, including laser cutting process, common layout function and laser processing control, most of its functions are applied in graphics processing, parameter settings, custom cutting process editing, layout, path layer planning, simulation and cutting process control. CypCut software can realize process control only if used with Dog and Control Card. CypCut will enter DEMO mode while running on a computer without Dog, so that you can get all other functions except process control for normal use. Therefore, CypCut can be installed in a separate notebook for the design before processing.
Reviews
There are no reviews yet.