PRESS BRAKE TOOLS DESCRIPTION :

Depends of the application and requirements of bends there are various geometry shapes for punches and dies of press brake tooling to perform standard or special sheetmetal bending. Without the connection to the press brake clamping system the type of the tool is important otherwise the required bend is impossible to achieve.

SHARP UPPER PUNCH

To perform the sharp bends usually punches and dies with the 26-28-30 degrees are used (or knife punches). The reason for the requirements of sharp bends could be different but usually it is the pre-bend (first bend) of the part to be flattened after with side to the side. Pre-bending with such way could be the reason of minimal deformation during the future flattening.

Size : 26.5 x 150 x 3200 (4 Segment)