| Hand operated type | |
| Max outer diameter of coil | 1400mm |
| Inner diameter of coil | Φ400-450mm |
| Max width of coil | 300mm |
| Capacity | 1500kgs |
| Roll Forming Machine | | |
| Roll forming station | 14 Nos |
| Material of roller | Gr15 steel |
| Surface hardness of roller | HRC 55˚~57˚ |
| Diameter of main shaft | 45mm, material:45# steel |
| Thickness of side board | 22mm |
| Model of bearing | 60208 |
| Thickness of motion transmitting gear | 35mm |
| Main motor | 5.5kw, cycloid-pin speed reducer |
| Roll forming speed | 10m/min |
| Cut Off Device | | |
| Automatic oil-pressure auto cut-off machine | |
| Equip with cutting mould 1 set ( with waste to cut-off ) | |
| Motor | 2.2kw |
| Equip with wind-cooling device | |
| Run Out Frame | | |
| Precision welding by angle steel | |
| Length | 6m |
| Electrical Components and Control System | | |
| Apply to normal electrical components to control | |
| Length decided by baffle plate | |
| Adopt to stop to cut-off | |
| Power supply | 380V, 50HZ |
Reviews
There are no reviews yet.