Narex Industrial Tools & Equipment Trading, Opposite Caterpillar showroom, Sharjah Industrial Area 2, P.O Box: 23097, Sharjah, UAE Tel: +9716-533-8277 info@narexuae.com

Narex Ind Tools and Equipment Trading

  /  Latest News   /  12kW Fiber Laser Cutting Machine UAE: The GKS16032SL Gantry Is Here

12kW fiber laser cutting machine UAE: GKS16032SL large-format gantry now at Narex UAE Sharjah showroom

12kW Fiber Laser Cutting Machine UAE: The GKS16032SL Gantry Is Here

12kW Fiber Laser Cutting Machine UAE: The GKS16032SL Gantry Is Here

Published November 2026 | By Narex UAE Technical Team, Industrial Machinery Supplier, Sharjah | Reading time: 8 min

12kW fiber laser cutting machine UAE: GKS16032SL large-format gantry now at Narex UAE Sharjah showroom

Quick Answer: The G.WEIKE GKS16032SL-12000W is a large-format, floor-rail 12kW fiber laser cutting machine with a Raycus source. It has now arrived at Narex UAE in Sharjah Industrial Area 2, where workshops can book a live test cut. Narex has supplied over 10,000 machines since 1994.

Key Takeaways

  • 12,000 W Raycus fiber laser source on a G.WEIKE floor-rail gantry.
  • Large-format floor-rail gantry built for cutting whole and thick plate.
  • Up to 80 m/min positioning speed and 0.5G acceleration (manufacturer data).
  • Dual-drive rack transmission with 2 × 2.9 kW Y-axis motors.
  • Supplied, installed and serviced by Narex UAE, with one day of operator training and 24-hour support.

Table of Contents

  1. What is the GKS16032SL-12000W?
  2. Full specifications
  3. What makes this gantry different?
  4. Who needs a 12kW fiber laser in the UAE?
  5. How much does a 12kW fiber laser cost in the UAE?
  6. Site preparation checklist
  7. Mistakes to avoid
  8. Why UAE workshops choose Narex
  9. FAQ

What Is the GKS16032SL-12000W Fiber Laser Cutting Machine?

The GKS16032SL-12000W is a large-format CNC fiber laser cutting machine that uses a 12 kW Raycus laser source on a floor-rail gantry to cut full-size steel plate. It is built by G.WEIKE for steel structure, heavy equipment and plate processing work, and 12kW Fiber Laser Cutting Machine UAE now available from Narex UAE in Sharjah.

Unlike a standard 3015 or 6025 machine, where the bed and frame are one unit, the GKS16032SL is a floor-rail design. The gantry rides on rails fixed to the workshop floor and travels over a modular, segmented bed. That layout is what allows long cutting lengths and heavy plate loads.

A fiber laser cutting machine is a thermal cutting system that focuses a fiber-delivered laser beam through a CNC-controlled head to cut mild steel, stainless steel, aluminium, galvanized steel, copper and brass. At 12 kW, the GKS16032SL is aimed at shops where thick plate is daily work, not an occasional job.

 

12kW fiber laser cutting machine UAE: G.WEIKE GKS16032SL large-format laser at Narex UAE, Sharjah

 

The new G.WEIKE large-format fiber laser at Narex UAE, Sharjah Industrial Area 2.

GKS16032SL-12000W Specifications

The table below lists the published manufacturer specifications from the GKS16032SL-12000W product page.

Parameter Value
Laser power / source 12,000 W, Raycus
X/Y positioning 0.1 mm per 10 m and 0.5 mm per 5 m
X/Y repeat positioning ±0.05 mm
X/Y maximum moving speed 80 m/min
X/Y maximum cutting speed 42 m/min
Maximum acceleration 0.5G
Transmission Dual-drive rack
Motor power (X / Y / Z) 1.3 kW / 2.9 kW × 2 / 0.75 kW
Guide rail width 35 mm
Laser protection Enclosed
Lubrication Automatic oiling
Power supply 380 V / 50–60 Hz / 60 A

Source: manufacturer data. Download the full spec sheet from the product page.

What Makes the GKS16032SL Gantry Different?

Four design choices separate this machine from a standard sheet laser: the floor-rail gantry, a head that protects itself, a bed you can extend, and sectioned fume extraction.

  • Floor-rail, large-format gantry: separate double guide rails on both sides and an integrated welded gantry carry the cutting head over the full bed length, with good cutting ability on whole and thick plate.
  • Auto-focus cutting head: the head adjusts focus automatically, which shortens piercing time on thick plate and speeds up cutting.
  • Capacitive sensing: the head follows warped sheet, reducing the risk of collisions that damage nozzles and ceramics.
  • Edge-seeking height control: the controller checks that the head is tracking the plate during edge-seeking, protecting it from impact.
  • Modular, segmented bed: the bed is spliced in sections and can be lengthened for future projects.
  • Segmented smoke extraction: each bed section has its own axial-flow fan drawing fumes downward from 360 degrees, so extraction follows the cut.

Who Needs a 12kW Fiber Laser Cutting Machine in the UAE?

A 12kW fiber laser makes sense when thick mild steel or stainless plate is a daily product and plate lengths exceed what a 6-metre bed can take. For thin-sheet job shops, a 3–6 kW machine is the better investment.

Laser power Typical work Best fit
1–3 kW Thin sheet, signage, brackets Small job shops, signage makers
3–6 kW Most fabrication up to about 20 mm Mixed job shops, HVAC, kitchenware
12–20 kW (GKS16032SL) Thick plate at production speed, full-length plate Steel structures, oil and gas, heavy equipment, tanks

Typical UAE users of a large-format 12 kW laser include:

  • Steel structure fabricators in Sharjah, Ajman and Abu Dhabi (Mussafah, ICAD) cutting base plates, gussets and long flanges.
  • Oil and gas skid and pressure vessel shops around Jebel Ali and DIP.
  • Crane, trailer and heavy equipment builders cutting long chassis members.
  • Tank, silo and bridge component fabricators working with plate over 6 m.
  • Subcontract cutting centres that serve several workshops and need high throughput.

Not sure which power you need? Compare all options in our Fiber Laser Cutting Machine Dubai: 2026 CNC Buyer’s Guide.

How Much Does a 12kW Fiber Laser Cutting Machine Cost in the UAE?

A 12 kW large-format fiber laser sits at the upper end of the indicative AED 180,000–500,000+ range for fiber laser cutting machines in the UAE. The final price depends on bed length, cutting head, chiller, extraction and installation scope.

Cost factor What changes the price
Bed length Standard length; extended modular sections add cost
Laser source Raycus 12 kW as standard; other brands on request
Cutting head and controller Auto-focus head included; options vary
Auxiliary equipment Chiller, air compressor and dryer, nitrogen or oxygen supply
Installation Foundation work, rail levelling, crane hire, commissioning
VAT 5% UAE VAT applies

Indicative 2026 UAE range. Prices change with configuration and exchange rates.

Request a quotation: send your plate sizes, materials and thicknesses to Narex UAE for a written offer.

How Do You Prepare Your Site for the GKS16032SL?

Plan the floor, power and material handling before the machine ships. A large-format floor-rail laser needs more preparation than a standard 3015 machine.

  1. Floor space: allow for the full machine footprint (ask Narex for the layout drawing), plus loading space on both sides and room for the source, chiller and extraction unit.
  2. Foundation: a level, reinforced concrete floor to carry the machine and full plate loads. Narex engineers will advise on levelling.
  3. Power: a stable 380 V, 50/60 Hz, 60 A supply for the machine, plus separate supply for the laser source and chiller.
  4. Assist gas: bulk oxygen for thick mild steel and nitrogen for stainless and aluminium, or an on-site nitrogen generator.
  5. Compressed air: a rotary screw compressor with a dryer to keep air clean in UAE humidity.
  6. Cooling and dust: keep the source and chiller in a shaded, ventilated area; UAE summer heat and dust shorten component life.
  7. Plate handling: an overhead crane or forklift that can lift full-length plates.

What Mistakes Should You Avoid When Buying a Large-Format Fiber Laser?

The most expensive mistake is buying more bed or power than your work needs, or less support than the machine needs.

  • Buying for kW alone: match the laser power to your thickness mix, not the highest number on offer.
  • Ignoring the foundation: a poorly levelled floor-rail system affects cut quality along the full length.
  • Underestimating gas costs: nitrogen use at 12 kW is significant; plan supply before installation.
  • No local spare parts: nozzles, protective lenses and ceramics must be available in the UAE, not weeks away.
  • Skipping the test cut: always cut your own material on the machine before you sign.

Why UAE Workshops Choose Narex

Narex UAE (Narex Industrial Tools and Equipment Trading) has supplied fabrication machinery from Sharjah since 1994. Here is what backs the GKS16032SL after it leaves our showroom:

  • Experience: over 32 years and 10,000+ machines installed across the UAE and GCC.
  • Expertise: 35+ in-house engineers for installation, commissioning and repairs.
  • Authority: G.WEIKE fiber lasers, authorized Hypertherm plasma, BOCO WELD laser welding and more under one roof.
  • Trust: one day of operator training after installation, 24-hour support, local spare parts, AMC contracts and an after-sales portal at service.narexuae.com.

Want to add laser welding next to your cutting line? Read our Laser Welding Machine Guide, or browse the full CNC fiber laser cutting machines range.

Book a Test Cut on the GKS16032SL

Bring your own plate to our Sharjah showroom and see the 12 kW gantry cut it.

Request a Quotation | WhatsApp Us

Narex UAE, Sharjah Industrial Area 2, Sharjah, UAE | +971 6 533 8277 | info@narexuae.com

 

Frequently Asked Questions

What is the GKS16032SL-12000W fiber laser cutting machine?

The GKS16032SL-12000W is a G.WEIKE large-format, floor-rail CNC fiber laser cutting machine with a 12,000 W Raycus laser source. It is built for cutting whole and thick steel plate, and Narex UAE supplies, installs and services it from Sharjah Industrial Area 2.

What size sheets can the GKS16032SL cut?

It is a large-format machine built to take full-length plate and oversized sheet without re-cutting. According to manufacturer data, the modular bed is built in sections and can be lengthened to suit a project.

How much does a 12kW fiber laser cutting machine cost in the UAE?

Price depends on bed length, laser source, cutting head, chiller, fume extraction and installation scope. A 12 kW large-format machine sits at the upper end of the indicative AED 180,000–500,000+ range for fiber lasers in the UAE. Send your plate sizes and materials to Narex UAE for a written quotation.

Which workshops need a 12 kW fiber laser instead of a 6 kW machine?

Workshops that cut thick mild steel and stainless plate every day, such as steel structure, oil and gas skid, heavy equipment, crane and tank fabricators. At 12 kW, thick plate cuts at a production speed that lower-power machines cannot match, and thin sheet runs faster too.

What power supply and floor space does the GKS16032SL need?

The machine runs on 380 V, 50/60 Hz, 60 A. As a large-format floor-rail machine, it needs a level concrete floor, crane or forklift access for loading plate, and room for the laser source, chiller and extraction unit.

How does the machine protect the cutting head on warped sheet?

Capacitive sensing lets the head follow warped or uneven sheet, and the height controller checks that the head is tracking the plate during edge-seeking, which reduces the risk of collisions. The cutting head also adjusts its focus automatically to shorten piercing and cutting time.

Can I see the GKS16032SL cutting before I buy?

Yes. Book a visit to the Narex UAE showroom in Sharjah Industrial Area 2 and bring your own plate. Our engineers will run a test cut, show you the edge quality and cycle time, and give you a written recommendation. Call or WhatsApp +971 6 533 8277 to book.

What after-sales support does Narex UAE provide for this machine?

Narex UAE provides delivery, installation and commissioning, one day of operator training after installation, 24-hour support, local spare parts and annual maintenance contracts. You can log service requests at service.narexuae.com. Narex has supported UAE fabrication workshops since 1994.

 

Conclusion

The GKS16032SL-12000W brings a 12kW fiber laser cutting machine on a large-format floor-rail gantry to UAE workshops, backed by local installation, training and spare parts. If thick plate and long parts are your daily work, it is built for you. Visit our Sharjah showroom, bring your material and see it cut before you decide.

About Narex UAE: Narex Industrial Tools and Equipment Trading, part of Narex Group, has supplied industrial machinery from Sharjah Industrial Area 2 since 1994. With 10,000+ machines installed across the UAE and GCC and 35+ in-house engineers, Narex supports fabrication workshops with fiber lasers, press brakes, plasma, welding and machining equipment, plus 24-hour after-sales support. Choose Wisely.