Narex Industrial Tools & Equipment Trading, Opposite Caterpillar showroom, Sharjah Industrial Area 2, P.O Box: 23097, Sharjah, UAE Tel: +9716-533-8277 info@narexuae.com

Narex Ind Tools and Equipment Trading

  /  Latest News   /  Press Brake Tonnage Calculation: What a 130 Ton Machine Can Bend

Press brake tonnage calculation guide for the Omega PB1332 130 ton CNC press brake – Narex UAE

Press Brake Tonnage Calculation: What a 130 Ton Machine Can Bend

Updated November 2026 | By Narex UAE Technical Team — Industrial Machinery Supplier, Sharjah | Reading time: 9 min

Quick Answer: Press brake tonnage calculation for air bending mild steel uses the rule tons per metre ≈ 66 × thickness² ÷ V-die opening. On a 130 ton x 3200 mm machine such as the Omega PB1332, that means about 4 mm mild steel over the full length. Narex UAE in Sharjah, supplying machines since 1994, will check any part for you.

Key Takeaways

  • Air bending mild steel needs about 650 × S² ÷ V kN per metre (about 66 × S² ÷ V metric tons).
  • With a V-die of 8 × thickness, mild steel needs roughly 8.3 tons per metre for every 1 mm of thickness.
  • The Omega PB1332 (130 ton x 3200 mm) bends about 4 mm mild steel, 2.5 mm stainless and 8 mm soft aluminium at full length.
  • Plan jobs at around 80% of rated tonnage (104 tons on a 130 ton machine).
  • Stainless steel needs about 1.5 times the tonnage of mild steel; soft aluminium about half.
  • Indicative 2026 UAE price range for CNC press brakes: AED 90,000 – 300,000.

Table of Contents

  1. What is press brake tonnage?
  2. How do you calculate press brake tonnage?
  3. Press brake tonnage chart for mild steel
  4. What can a 130 ton press brake bend?
  5. Omega PB1332 specifications
  6. Press brake price in the UAE
  7. How to size tonnage for your workshop
  8. Tonnage mistakes to avoid
  9. Why UAE workshops choose Narex
  10. Frequently asked questions

What is press brake tonnage?

Press brake tonnage is the bending force a press brake ram can apply, measured in metric tons or kilonewtons (1 ton ≈ 9.81 kN). A CNC press brake is a sheet metal forming machine that presses a punch into a V-shaped die to fold sheet and plate into angles, channels and boxes, used in steel fabrication, HVAC ducting, kitchen equipment and enclosure work.

Every bend needs a certain force, set by four things: sheet thickness, the tensile strength of the material, the V-die opening and the length of the bend. Get the calculation right and you know, before you buy, whether a machine can handle your thickest and longest parts with headroom to spare.

How do you calculate press brake tonnage?

For air bending, the most common method in UAE workshops, the force per metre of bend is roughly 1.42 × tensile strength × thickness² ÷ V-die opening. For mild steel with a tensile strength of about 450 N/mm², that simplifies to a rule most press brake operators know by heart:

Force (kN per metre) = 650 × S² ÷ V
Force (tons per metre) ≈ 66 × S² ÷ V

Where S is sheet thickness in mm and V is the V-die opening in mm. Multiply the result by the bend length in metres to get the total force needed.

Worked example: 3 mm mild steel, 3 metres long

  1. Choose the V-die: 8 × 3 mm = a 24 mm V opening.
  2. Force per metre: 650 × 3² ÷ 24 = 244 kN/m, or about 24.8 tons per metre.
  3. Total force: 24.8 × 3.0 m = about 75 tons.
  4. Check headroom: 75 tons is 57% of a 130 ton machine, comfortably inside the 80% working limit.

Material factors

Other materials scale from mild steel by their tensile strength. These are typical working factors; your steel supplier’s mill certificate gives the actual figure for each batch.

Material Typical tensile strength (N/mm²) Tonnage factor vs mild steel
Mild steel (S235 / S275) ≈ 450 1.0
Galvanized steel (GI) ≈ 450 1.0
Stainless steel 304 ≈ 650 – 700 ≈ 1.5
Aluminium (soft grades, e.g. 5052) ≈ 200 – 250 ≈ 0.5
Brass ≈ 300 – 350 ≈ 0.7

The Omega PB1332 product page includes a free tonnage calculator for mild steel, stainless steel, aluminium, brass and Cr-Mo steel, so you can run your own numbers in seconds.

Press brake tonnage chart for mild steel

The table below gives the force needed per metre of bend for mild steel, using the 8 × thickness V-die rule. Figures are calculated with the formula above and rounded; use them for planning, then confirm with a test bend.

Thickness (mm) V-die opening (mm) Force (kN/m) Force (tons/m) Force for 3.2 m bend (tons)
1.0 8 81 8.3 27
1.5 12 122 12.4 40
2.0 16 163 16.6 53
3.0 24 244 24.8 80
4.0 32 325 33.1 106
5.0 40 406 41.4 132
6.0 48 488 49.7 159
8.0 64 650 66.3 212

Source: calculated with the standard air-bending formula, mild steel at 450 N/mm². For stainless steel multiply by about 1.5; for soft aluminium by about 0.5.

Two rules of thumb go with this chart. The inside bend radius in air bending comes out at roughly one-sixth of the V opening, and the shortest flange you can bend is roughly 0.7 × V. So a wider die saves tonnage but costs you a larger radius and a longer minimum flange.

What can a 130 ton press brake bend?

A 130 ton x 3200 mm press brake bends about 4 mm mild steel along its full 3.2 metre length, needing roughly 106 tons. As the bend gets shorter, the same 130 tons is spread over less material, so thicker sheet becomes possible. The figures below apply the 80% working limit (104 tons) to the Omega PB1332 CNC press brake.

Bend length (mm) Mild steel (mm) Stainless steel 304 (mm) Soft aluminium (mm)
3200 (full length) ≈ 4 ≈ 2.5 ≈ 8
2500 ≈ 5 ≈ 3.3 ≈ 10
2000 ≈ 6 ≈ 4 10+ (die-limited)
1500 ≈ 8 ≈ 5.5 10+ (die-limited)
1000 ≈ 10 – 12 (tooling-limited) ≈ 8 10+ (die-limited)

Calculated estimates at 104 tons with a V-die of 8 × thickness. At short lengths and heavy gauges, the tooling load limit (tons per metre) usually decides the maximum, not the machine. Send your drawing and Narex will confirm.

In practice this covers most of the work in UAE fabrication shops: 1–3 mm GI and stainless for HVAC ducts and kitchen equipment, 2–4 mm mild steel for enclosures and brackets, and 6–8 mm plate for base plates and gussets on shorter lengths.

What are the Omega PB1332 specifications?

The Omega PB1332 is a 4-axis CNC hydraulic press brake with CNC crowning, rated at 1300 kN (130 tons) over a 3200 mm bending length and controlled by a DELEM DA-53T. Full figures from the manufacturer’s data sheet:

Parameter Omega PB1332
Nominal force 1300 kN (130 tons)
Bending length 3200 mm
Distance between frames 2700 mm
Throat depth 410 mm
Stroke 215 mm
Max. shut height 520 mm
CNC controller DELEM DA-53T
CNC axes Y1, Y2, X, R + V (CNC crowning)
Ram speed (approach / working / return) 180 / 10 / 130 mm/s
Back gauge stroke X 600 mm, R 200 mm
Back gauge positioning tolerance X ±0.10 mm, R ±0.50 mm
Back gauge speed X 400 mm/s, R 200 mm/s
Main motor 9 kW
Oil tank 300 L
Power supply 380 V / 50 Hz
Dimensions (L × W × H) 3600 × 1650 × 2850 mm
Weight ≈ 8000 kg

Source: Omega manufacturer data, as listed on narexuae.com.

Three of these figures matter most when you check tonnage against real parts. The 2700 mm distance between frames means a box or tray wider than 2.7 m cannot pass between the side frames, even though the bed is 3.2 m long. The 410 mm throat depth limits how deep a flange you can bend near the end of a long sheet. And the CNC crowning (V-axis) compensates for bed and ram deflection under load, which keeps the bend angle consistent from one end of a 3 metre part to the other, exactly where tonnage is highest.

How much does a press brake cost in the UAE?

A CNC press brake in the UAE falls in an indicative range of AED 90,000 to 300,000 in 2026. Tonnage and bending length set the base price; the controller, number of CNC axes, crowning and tooling package move it up or down.

Machine Indicative 2026 UAE range (AED, excl. 5% VAT) Typical warranty
CNC press brake 90,000 – 300,000 12 months
Fiber laser cutting machine 180,000 – 500,000+ 12–24 months
Plasma cutting machine 60,000 – 250,000 12 months

Prices are indicative only. For a written price on the Omega PB1332 including delivery, installation and training, request a quotation or message us on WhatsApp.

How do you size press brake tonnage for your workshop?

Size a press brake from your hardest regular job, not your average one, then add headroom. This six-step check takes ten minutes with your drawings in front of you:

  1. List your thickest and longest parts for each material: mild steel, GI, stainless 304/316 and aluminium.
  2. Pick the V-die for each at 8 × thickness (wider for thick plate, narrower only if the flange is short).
  3. Calculate force per metre with 650 × S² ÷ V, then apply the material factor.
  4. Multiply by bend length to get total tons for each part.
  5. Divide by 0.8 to find the rated tonnage you need with working headroom.
  6. Check the geometry: distance between frames, throat depth, stroke and shut height against your deepest boxes and tallest flanges.

If your hardest part needs more than about 104 tons at full length, look at a higher-tonnage model in the Omega press brake range. If it needs far less, a smaller machine may be the better buy. Our guide on how to choose the right press brake in the UAE covers the CNC vs hydraulic decision in more depth.

Which UAE industries use a 130 ton press brake?

The 130 ton x 3200 mm class is the most common size in UAE sheet metal shops because it handles full 3-metre sheet in the gauges most trades use.

  • HVAC and ducting (Sharjah, Dubai Al Quoz, Abu Dhabi Mussafah): 0.8–1.5 mm GI duct panels, flanges and transitions.
  • Stainless steel kitchen equipment: 1–2 mm 304 tables, hoods and cabinets for hotels and restaurants.
  • Electrical enclosures and switchgear: 1.5–3 mm mild steel panels and doors.
  • Steel structures and construction (Jebel Ali, DIP, ICAD): brackets, cleats, base plates and gussets in 6–10 mm on short lengths.
  • Signage and façades: aluminium cladding trays and letter returns.
  • Truck bodies and trailers: 3–4 mm mild steel side panels and mudguards.

What tonnage mistakes should you avoid?

Most press brake problems in UAE workshops trace back to a few planning errors made before the machine arrives.

  • Sizing to 100% of rated force. A job that needs 128 tons on a 130 ton machine leaves no margin for a thicker or harder batch of steel.
  • Forgetting stainless steel. A part that is easy in 3 mm mild steel can exceed capacity in 3 mm stainless at full length.
  • Using too narrow a V-die. Halving the V opening doubles the tonnage needed and can crack the tooling.
  • Loading short, thick parts in the centre. Full tonnage on 300 mm of 10 mm plate can exceed the punch and die load limit even though the machine is within rating.
  • Ignoring distance between frames. A 3200 mm bed does not mean a 3200 mm wide box will fit through the frames.
  • Bottoming or coining by habit. These methods need three to five times the force of air bending; plan for them separately.

For problems that show up after installation, such as angle variation along the length or springback on stainless, see 7 press brake bending problems and how UAE fabricators fix them.

Why UAE workshops choose Narex

Experience: Narex UAE has supplied industrial machinery since 1994, with more than 10,000 machines installed across the UAE and GCC.
Expertise: 35+ in-house engineers handle installation, commissioning and service, and can calculate tonnage and tooling for your exact parts.
Authority: Narex supplies Omega press brakes, Gweike fiber lasers and is an authorized Hypertherm supplier.
Trust: Delivery, installation and commissioning, one day of operator training, 24-hour support, local spare parts and AMC contracts, backed by the after-sales portal at service.narexuae.com.

Before you commit, visit the Sharjah showroom and test bend your own sheet on the press brake. You will see the bend quality and cycle time on your actual parts. For a full walk-through of this machine, read our Omega CNC 130 ton press brake buyer’s guide or browse all press brake machines.

Request a Quotation

Request a Quotation · WhatsApp +971 6 533 8277
Narex UAE, Sharjah Industrial Area 2, Sharjah, UAE | +971 6 533 8277 | info@narexuae.com

 

Frequently Asked Questions

How do you calculate press brake tonnage?

For air bending mild steel, tonnage per metre is about 650 × thickness² ÷ V-die opening, giving kN per metre; divide by 9.81 for metric tons. Multiply by the bend length in metres. Stainless steel needs roughly 1.5 times that figure and soft aluminium about half.

What thickness can a 130 ton press brake bend?

A 130 ton press brake such as the Omega PB1332 bends mild steel up to about 4 mm across its full 3200 mm length, stainless steel up to about 2.5 mm and soft aluminium up to about 8 mm, using a V-die eight times the sheet thickness. Shorter parts allow thicker material.

What V-die opening should I use for my sheet thickness?

Start with a V-die opening of eight times the sheet thickness for mild steel up to about 12 mm, for example a 24 mm V for 3 mm sheet. A wider V lowers the tonnage needed but gives a larger inside radius and a longer minimum flange; a narrower V does the opposite.

Why should a press brake not run at 100% of its rated tonnage?

Working at around 80% of rated tonnage leaves headroom for variation in sheet thickness and tensile strength between batches, reduces stress on the hydraulic system and frame, and keeps bend angles consistent along the length. It also protects tooling, which has its own load limit per metre.

Can I bend thick plate on a short length at full tonnage?

Not always. Rated tonnage assumes the load is spread over a reasonable length. Concentrating full force on a short piece in the centre can overload the punch, die and ram. Check the tooling load limit in tons per metre and ask your supplier before bending short, thick parts.

What does the DELEM DA-53T controller do on the PB1332?

The DELEM DA-53T is a touchscreen CNC controller that drives the Y1 and Y2 ram cylinders, the X and R back gauge axes and the V-axis crowning. Operators program part dimensions, angles and bend sequence, and the controller sets positions and crowning for each bend automatically.

How much does a 130 ton CNC press brake cost in the UAE?

CNC press brakes in the UAE sit in an indicative range of AED 90,000 to 300,000 in 2026, depending on tonnage, bending length, controller, number of axes and tooling. For a firm price on the Omega PB1332 130 ton x 3200 mm, request a quotation from Narex UAE in Sharjah.

Can I test bend my own parts before buying a press brake?

Yes. Narex UAE runs live demonstrations at its showroom in Sharjah Industrial Area 2, where you can bring your own sheet and drawings and test bend them on the machine. Call or WhatsApp +971 6 533 8277 to book a time.

Conclusion

Press brake tonnage calculation comes down to one formula: about 66 × thickness² ÷ V-die opening tons per metre for mild steel, scaled for stainless and aluminium and multiplied by bend length. On the Omega PB1332 130 ton x 3200 mm, that means around 4 mm mild steel at full length and thicker plate on shorter parts. Bring your drawings to our Sharjah showroom and we will confirm the numbers with a test bend.

About Narex UAE: Narex Industrial Tools & Equipment Trading (Narex UAE), part of Narex Group, has supplied fabrication machinery to UAE workshops since 1994. With 10,000+ machines installed across the UAE and GCC and 35+ in-house engineers, Narex supplies fiber lasers, CNC press brakes, plasma, welding and machining equipment from its Sharjah Industrial Area 2 showroom, with local installation, training and spare parts. Choose Wisely.